TruArc Weld 1000
Easy access to automated welding
The TruArc Weld 1000 has easy programming that enables automated welding. Operation is so simple that no training is required to operate, program and operate the welding cell.
TruArc Weld 1000
Simple programming for safe welding
The welding cell is a fully equipped machine tool, with TÜV and CE certificate; in addition, the suction system, the outer casing with anti-glare protection and the security configuration are included. The welding cell can be used in single or dual station mode depending on component size and batch size. It is possible to produce a larger component or a smaller component in larger quantities during production time.
Simple operation and programming
Quick installation and startup
|TruArc Weld 1000|
|TYPE||Collaborative industrial robotic arm|
|NUMBER OF AXLES||6|
|REPEAT ACCURACY||+/- 0,05 mm|
|TYPE||FRONIUS TPS 320i C PULSE|
|MIG/MAG WELDING CURRENT RANGE||3 A - 320 A|
|DIMENSIONS AND WEIGHTS|
|CABIN DIMENSIONS||3605 mm x 2454 mm x 2818 mm|
|TYPICAL COMPONENT SIZE MAX. (WITH CLOSED TELESCOPIC CENTRAL GAP)||600 mm x 600 mm x 600 mm|
|TYPICAL COMPONENT SIZE MAX. (WITH OPEN TELESCOPIC CENTRAL PARTITION)||2000 mm x 600 mm x 600 mm|
The equipment of the TruArc Weld 1000 allows a safe, simple and efficient use.
With the TruArc Weld 1000, minimal programming times are achieved as it combines the intuitive welding stand operating unit and simple part programming directly on the robot controller. The central handling unit of the machine is clear and simple.
Collaborative robot UR10e with six axes and moment of force sensor. The linear axis positions the robot left or right.
Protection cabin with integrated suction system, automatic opening anti-glare protection and lighting. Removable partition wall divides the work area if needed for dual station mode.
High-performance welding equipment from Fronius: TPS 320i C PULSE, power source with PMC welding package, 350 amp ultrafine burner and external wire feed system.
Demmeler 3D welding table with D16 hole pattern in 50 x 50 mm grid and hardened surface. The dimensions of the table are 2000 x 1000 x 100 mm.
Easy loading of large and heavy components as well as devices by opening the cabin cover over both stations and loading the components into the machine with a crane.
CMT welding technology package
With the optional CMT welding technology pack, greater process safety is achieved while reducing the energy required for welding in the TruArc Weld 1000, thanks to reduced weld spatter and reduced deformation.
Pendular welding offers a multitude of benefits, especially for machining thick plates, as its wide weld seams can prevent joint failures.
Do you want to know more information?
At Ripleg we have all the subcontracting services necessary to carry out our clients’ industrial projects, from technological design to the finished product.